dry lining

[davebarlow]

hi all. hope you can help me. i have a utility room that i am renovating. i have removed the old conti board and batons that was on the walls to reveal brickwork that looks like it has been painted in the old white wash emulsion, my questions are. can i get a insulated plaster board that i can dot and dab straight on the wall, as 3 of the walls are external walls, if so will the ordinary dot and dab adhesive bond to the old white wash walls once they have been dusted off and uni bonded.

many thanks
Dave

 

[ColJack]

perhaps better asked in the plastering forum? I'll give the MOD's a nudge to move it..

 

[PrenticeBoyofDerry]

Try this link will give you an idea what products are out there.
Plasterboard products http://www.british-gypsum.com/products/plasterboard___accessories.aspx

Thermal Boards http://www.british-gypsum.com/products/plasterboard___accessories/gyproc_thermal.aspx

 

[davebarlow]

thanks for the link. i now know i can get the boards but need an answer to the other question which is that the walls are covered in what i believe to be the old white wash emulsion, if i brush them down and give them a coat of uni bond will the adhesive bond to the wall ?

 

[PrenticeBoyofDerry]

Sorry about that, you can by using both dot'n'dab and wall plug systems.
http://www.british-gypsum.com/pdf/WB09_DriLyner_02.pdf
page 4 I think will help