ive got to install an earth rod abroad where uk regulations dont apply
wont have access to a meter, but generally if you bang in a load of rods say 4-5... would that generaly produce a low enough reading to trip a 100mA RCD?
hypethetically, because I appreciate its impossible to know without a test meter.
but, despite the results of the OP, would it be safe to assume, generally/normally the more rods you bang in and depper you go the lower the ohm reading.
wont have access to a meter, but generally if you bang in a load of rods say 4-5... would that generaly produce a low enough reading to trip a 100mA RCD?
hypethetically, because I appreciate its impossible to know without a test meter.
but, despite the results of the OP, would it be safe to assume, generally/normally the more rods you bang in and depper you go the lower the ohm reading.