Did a test on a new installation which was a TT. Not done a TT test before.
I used my EFLI tester to measure the earth electrode resistance, same as doing a Ze test (which was 69.4ohms)
Just filling out the EIC, do I put n/a in the 'Electrode resistance, Ra' box & put my result in the 'measured Ze' box ?
I used my EFLI tester to measure the earth electrode resistance, same as doing a Ze test (which was 69.4ohms)
Just filling out the EIC, do I put n/a in the 'Electrode resistance, Ra' box & put my result in the 'measured Ze' box ?