Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
The door won't open if there is water inside.
Perform emergency emptying according to your user manual..or like this:
Pull out the plug from the power socket & close the water tap. Open the the pump door (lower right hand side at the front of the machine). Place a bowl on the floor and put the end of the emergency emptying hose into the bowl. Remove the plug in the end of the hose, the water should gravity drain into the bowl. When the bowl is full, put the plug back in the hose. Empty the bowl & repeat the procedure until water stops flowing out.
When the water is drained place an old towel or similar on the floor to catch any excess water that might run out then unscrew the pump filter & check for blockages (lumps of clothing fibers, hairpins, coins, rubber bands etc, etc). Good luck
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local