I don't know if this is the right place, because my problem covers both electrics and plumbing!
We had a complete re-wire, everything fine. We then had to have the CH pipework replaced with copper pipes, as the old plastic was just that...OLD!
I've lifted some floorboards to check on some issues, and I've found that the plumber has put at least one of the pieces of piping below the electrical cable. When the floorboard goes back down, it appears to press the cable against the pipe, which gets hot. I'm concerned about the hot pipe damaging the cable and causing a potential fire hazard.
Am I right to worry?
We had a complete re-wire, everything fine. We then had to have the CH pipework replaced with copper pipes, as the old plastic was just that...OLD!
I've lifted some floorboards to check on some issues, and I've found that the plumber has put at least one of the pieces of piping below the electrical cable. When the floorboard goes back down, it appears to press the cable against the pipe, which gets hot. I'm concerned about the hot pipe damaging the cable and causing a potential fire hazard.
Am I right to worry?