Enamel for alloy wheel?

My favourite tyre place charges £11 for repairing or replacing tyres, including perfect balance...
 
My favourite tyre place charges £11 for repairing or replacing tyres, including perfect balance...
My favorite tyre place in my garage didn't charge me at all. My regular wheel didn't need a rebalance. My play wheel won't need a balance for short town travels.
 
IMG_3367.gif
 
How can a wheel not need balancing after taking the tyre out?!?!
The tyre was not taken off for the regular wheel. The tyre was resealed at the same position.

For 20mph city speeds, unbalanced wheel has no effect. If it does have an effect, it's not too late for me to get it balanced then. In any case, the play wheel needs a new tyre before it can be used. I will buy a chinese ditch finder and mount it when I need to. I have no such need currently.
 
Guys! You're getting sucked-in, here! I regarded the purpose of this thread as being a kind of "fly paper" for internet fora! Nutjob was perfectly happy, replying to himself on here and it kept him off the other threads. Now look what you've done! :ROFLMAO:
 
The 2 wheels are neck and neck in the latest pressure reading. This is good enough as a mutual verification of them being as good as they are going to get. I will do one more reading at the 2 month mark and then let them be. The lowered pressure could be to do with temperature or natural unsealable leak.

2026-10-21 12:30 standalone gauge
Reg1 2.225 bar
Reg2 2.225 bar

2026-10-04 16:30 standalone gauge
Reg1 2.425 bar
Reg2 2.415 bar

2026-09-18 10:00 china inflator with gauge
Reg1 2.45 bar
Reg2 2.45 bar
 
Here's a more realistic portrait of DIY tyre changing. The guy is very experienced and had easy times with japanese wheels. A non-japanese wheel has smaller drop-center space and far more challenging. He correctly identified one of the main problems being the guides for guiding the tyre bead into the drop center: these helped and obstructed him at the same time. The key is removing them as soon as these are not needed.

 
The leak repair has been successfully completed. Nevertheless, I think there is still a tiny leak. The wheels were shop refurbished many years ago. The refurbishment clear coated only the externally visible parts. This left the bead seats finished with paint having a rough texture because of micro aluminum flakes in the paint. This promotes leaking. If I ever open the tyres again, I will apply a central band of bead sealant along the entire bead seat to block the micro leaks. For now, having to top up air every few months is within my tolerance. My ideal of every 6 months has not been achieved.

2026-11-22 13:30 standalone gauge
Reg1 2.2 bar
Reg2 2.2 bar

2026-10-21 12:30 standalone gauge
Reg1 2.225 bar
Reg2 2.225 bar

2026-10-04 16:30 standalone gauge
Reg1 2.425 bar
Reg2 2.415 bar

2026-09-18 10:00 china inflator with gauge
Reg1 2.45 bar
Reg2 2.45 bar
 
Originally, it was a back up plan. So, there is no actual requirement for this. I remain interested to have a non-damaging way to mount and unmount tyres on all my wheels. This should be the final buy for the tools I need to continue the exploration. On this occasion, Ebay has better deal than china.

tyre-spoons.jpg


These are 14.5 inches long and feels heavy duty. The round shafts are not suitable for prying because they concentrate enough force at a single spot to crush the wheel aluminum. The force will also penetrate any rim protector. I will rely on the tiny amount of flats on the shafts only. Japanese made tyre spoons have larger flats on them. But those are expensive and hard to come by.
 
Back
Top