Might be using a couple of these https://www.bes.co.uk/2-way-end-feed-brass-manifold-22mm-x-8mm-7387 tomorrow if I can find them locally.
Just to check, I solder the fitting onto 22mm pipe as though it was a stop end and heat the manifold and apply solder to the microbore pipes where they enter?
Bonus manifold questions:
On a bigger manifold, If one side is flow and the other return, how are the pipes at the bottom configured?
Just to check, I solder the fitting onto 22mm pipe as though it was a stop end and heat the manifold and apply solder to the microbore pipes where they enter?
Bonus manifold questions:
On a bigger manifold, If one side is flow and the other return, how are the pipes at the bottom configured?