Hi There
We have an old Miele KM418 induction hob that has failed. I thought, just replace it with another unit... They don't make that model anymore and the hole is slightly too small for current models!
Our hole is currently 267 x 503 an it needs to be 272 (see image).
Any advice on how I should approach this? I can take the top outside (although it's very heavy).
My approach currently would be to mark it out with masking tape and using an angle grinder with a new diamond blade gently cut the 5mm out from the top surface downwards.
Any advise greatly welcomed.
Thanks in advance
We have an old Miele KM418 induction hob that has failed. I thought, just replace it with another unit... They don't make that model anymore and the hole is slightly too small for current models!
Our hole is currently 267 x 503 an it needs to be 272 (see image).
Any advice on how I should approach this? I can take the top outside (although it's very heavy).
My approach currently would be to mark it out with masking tape and using an angle grinder with a new diamond blade gently cut the 5mm out from the top surface downwards.
Any advise greatly welcomed.
Thanks in advance