Exceeding the manufacturers recommended gauge

Joined
8 May 2012
Messages
169
Reaction score
8
Location
Cheshire
Country
United Kingdom
Hi,

I have a small porch canopy to tile (6ft x 2ft). I'm using marley clay tiles which have a max stated gauge of 100mm, am I ok to increase this slightly to 120mm?
My reasoning is that I dont want to add too much weight to the canopy and the porch is in a sheltered position so isn't exposed to the prevailing wind / rain.

Thanks in advance
 
Why would you, seems bonkers to me. What happens if it gets a covering of snow? Surely the canopy is built better than that. If it is so fragile as to worry about an extra course of tiles then you should not be sheltering beneath it.
What is the roof pitch?
 
Its just over 30 degrees. I want to increase the gauge so the spacing doesn't look odd near the ridge
 
The spacing always looks out of kilter near to the ridge, especially when you consider the short course.

Your roof is already under pitched so even more reasons for not opening up the gauge.
 
IMG_1816.JPG
IMG_1822.JPG
If its the one I have seen a picture of which is more of a door canopy
really then you will be fine.
Hi Catlad,

Yes that's the one, I've finally finished (nearly...). Just got some more painting to do and the leadwork.

The gauge ended up being 115mm, but each tile was still double lapped. We've had quite a bit of rain the past two days and (touch wood) it hasn't leaked. If it was on a habitable part of the building I would of course not have exceeded the max 100mm.

If it leaks I shall report back, if not, people can use this info as they wish.
 
This is what it was like
IMG_0961.JPG


Can't think of anything worse than PVC to be honest, I think Safestyle have ruined so many good looking buildings!

It's a wooden door (not sure how old) that I've stripped and painted. Since the pictures been taken I've stained the fascia and plugged the drill holes, ill upload a picture soon.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top