Hi
If some one can advise please it would be much appreciated.
We are building a garage/workshop 12m by 6.4m....
We are just below roof level and noticed a couple of cracks in the blockwork
in both a 12m run and 6m run.We have no expansion joints as wasnt specified in drawings,dont think my brickie has ever put in a expansion joint so wasnt aware.
I think we are going to either cut out a 10mm gap where the cracking is(preferred option) to put in expansion joint or cover with a pier.
My concern now is shall we also look to put in a expansion joint in the brickwork.It is a 12m run without any breaks or corners etc in it.
Thanking you in advance for any ideas
If some one can advise please it would be much appreciated.
We are building a garage/workshop 12m by 6.4m....
We are just below roof level and noticed a couple of cracks in the blockwork
in both a 12m run and 6m run.We have no expansion joints as wasnt specified in drawings,dont think my brickie has ever put in a expansion joint so wasnt aware.
I think we are going to either cut out a 10mm gap where the cracking is(preferred option) to put in expansion joint or cover with a pier.
My concern now is shall we also look to put in a expansion joint in the brickwork.It is a 12m run without any breaks or corners etc in it.
Thanking you in advance for any ideas