Extending 6mm Shower Cable.

[charliegolf]

I was just going to get a maint free jb, but the join is inside studwork, so I suspect it's a no-no.

Any advice? It wouldn't actually kill me to run a new 10mm cable to the CU, but a join would be easier short term, not least because the existing cable already goes through the pull cord.

Thanks.

 

[securespark]

In an ideal world, the fewer joints you have, the better.

Can you run a new length from the switch, as the switch is a natural break in the cable anyway, so you are not introducing any further joints?

 

[charliegolf]

Would not have thought of that, and I like not having the joint. Thanks very much.

 

[securespark]

No worries!