- Joined
- 7 Apr 2004
- Messages
- 30
- Reaction score
- 0
- Country
I want to replace a fusebox with a MCB consumer unit, but the neutral wires in the fusebox are quite short. Is it permisable to extend them inside the consumer unit using connector blocks?
What about putting something like this before the CU:sasolshares said:Hi guys,
Getting a bit confused here. The wires in question are not long enough to take to any sort of connector block on the din rail
Well - on closer examination of the picture......plugwash said:no bas
din rail terminals are not shaped properly to be fitted into CU style din rail enclosures (which expect a device with a large protrusion in justthe right place to go through the panel
also that box is intended to be bolted to a 3 phase board and for the end cover plate of the 3 phase board to be moved onto it its not really suitable for any other fitment
if hard to replace cables only exit the CU in one direction then you could move the CU position a bit
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local