The house we have just moved to has 3 exterior lights on a 2-way circuit - 1 switch inside, 1 weatherproof switch outside. I want to swap the outside switch for a photo electric cell. I have bought the Danlers Twilight switch. So far so good. But...
- the existing MK exterior switch has 3 terminals L1 (blue wire) L2 (yellow), COM (red) And an earth going to a block in the case.
- the Danlers device has terminals for LIVE IN, NEUTRAL IN and SWITCHED LINE OUT.
Can anyone advise how I need to connect the new switch to the red, yellow, blue wires?
Thanks
Paul
- the existing MK exterior switch has 3 terminals L1 (blue wire) L2 (yellow), COM (red) And an earth going to a block in the case.
- the Danlers device has terminals for LIVE IN, NEUTRAL IN and SWITCHED LINE OUT.
Can anyone advise how I need to connect the new switch to the red, yellow, blue wires?
Thanks
Paul