- Joined
- 20 Apr 2014
- Messages
- 2,467
- Reaction score
- 0
- Country
how do I wire a bathroom fan with a timer, it obviously needs to live supplies can I use twin & earth?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
extractor fan
- Thread starter AnonymousImport
- Start date
- Joined
- 20 Apr 2014
- Messages
- 2,467
- Reaction score
- 0
- Country
You need two live supplies - one from the live side of the light switch, and one from the switched side of the lightwitch. You will also need a neutral, and probably an earth. You would be better using 4-core cable, but you could use 1.5 mm twin and earth with a seperate 1.5 mm PVC/PVC single for the additional live supply.
- Joined
- 22 Sep 2002
- Messages
- 114
- Reaction score
- 1
- Country
I normally use 3 core and earth 1mm cable. Fan consumption typically 25W or 0.1A so tiny. Nothing wrong but only really need round 4 core cable in areas needing IPx4 protection - swimming pools!
I ensure Yellow goes to light switch on switch live side. Rest Live, neutral and earth.
I ensure Yellow goes to light switch on switch live side. Rest Live, neutral and earth.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
