following on from my previous thread
im building a stud wall either side and above for 4x762mm sliding mirror doors
the opening is going to be around 3m for the 4 doors will standard 3x2 cls timber be strong enough to take the weight of the doors if its braced from the top as you would doing a normal stud partition
a bit like: (my very crude drawing skills)
Uploaded with ImageShack.us
and also would you use one 3m length or 2 lengths braced
i only ask that as my local timber yard is a few miles away and my van is in dock whilst im off work and i begrudge paying their extornionate deliver prices for one piece of cls
cheers
im building a stud wall either side and above for 4x762mm sliding mirror doors
the opening is going to be around 3m for the 4 doors will standard 3x2 cls timber be strong enough to take the weight of the doors if its braced from the top as you would doing a normal stud partition
a bit like: (my very crude drawing skills)
Uploaded with ImageShack.us
and also would you use one 3m length or 2 lengths braced
i only ask that as my local timber yard is a few miles away and my van is in dock whilst im off work and i begrudge paying their extornionate deliver prices for one piece of cls
cheers
