Fascia and soffit replacement with new eaves protector

[germproof1206]

Hello,

I replaced my old wooden fascia, and soffits with new PVC ones and installed eaves protectors.
The new fascia is 175mm tall, the old one was 160mm.
I removed 2 of the old battens, replaced them and added more on top and below to support the eaves protectors and eaves tiles:

I tried to avoid adding new battens, but whatever I did, the eaves protector ended up being forced on to the fascia.

In this picture you can see the "final" setup with the top 3 battens visible over the felt and eaves protector

I've only done one side, so before I continue mocking this up I hoped I could get some advice here.

Thank you