I have a Ferroli 2 boiler which I think is also known as a Modena 80e. The problem is the hot water is not hot enough if the taps are run at what would be considered normal speed. If bath or shower taps are fully on for heat it will start running very hot then end up lukewarm. If I turn the taps down then it will be hot enough but takes forever to run a bath and the shower is just too weak to get a decent shower. Its only happened this year.
I have changed the hot water thermistor but it hasnt made a difference. When the boiler fires up for hot water it runs smoothly and doesnt cut out, the water just doesnt get hot enough. the temp setting for the water is also up high too. The heating works fine and the rads get very warm.
What else can I check myself.
Thank you
I have changed the hot water thermistor but it hasnt made a difference. When the boiler fires up for hot water it runs smoothly and doesnt cut out, the water just doesnt get hot enough. the temp setting for the water is also up high too. The heating works fine and the rads get very warm.
What else can I check myself.
Thank you