- Joined
- 24 May 2019
- Messages
- 4
- Reaction score
- 0
- Country
Hi all,
We had Firebird c35 (3 years old) relocated a couple of meters on Tuesday.
On firing up all appeared to work but then the engineer noticed the hot water heated up to temperature on starting up but then doesn’t kick in when the taps turned on so just cools down to cold on running the tap.
The HW pump appears to be running for a very long time and when you turn it off at the control panel it lets steam out.
Any ideas before the bill gets higher
Thank you
We had Firebird c35 (3 years old) relocated a couple of meters on Tuesday.
On firing up all appeared to work but then the engineer noticed the hot water heated up to temperature on starting up but then doesn’t kick in when the taps turned on so just cools down to cold on running the tap.
The HW pump appears to be running for a very long time and when you turn it off at the control panel it lets steam out.
Any ideas before the bill gets higher
Thank you