- Joined
- 5 Jan 2020
- Messages
- 15
- Reaction score
- 0
- Country
Hi
I have a Texecom Premier Elite 24 running firmware 1.09. I also have the wireless box (ricochet?) which connects to 2 PIR's in the garage, these currently do not get set, but I don't want to lose functionality as they may be set in the future.
I have the JAC-001 lead and know I need to acquire the flash PCB to do the upgrade.
Can I just backup the settings using the JAC-001 and Wintex software then flash the panel to the latest firmware, reset, then restore the backup or would it be advisable to upgrade in increments?
I'm only upgrading to allow me to install a smartcom unit. I don't have the knowledge to reprogram from scratch if it all goes wrong!
Any assistance kindly received.
Greenstick
I have a Texecom Premier Elite 24 running firmware 1.09. I also have the wireless box (ricochet?) which connects to 2 PIR's in the garage, these currently do not get set, but I don't want to lose functionality as they may be set in the future.
I have the JAC-001 lead and know I need to acquire the flash PCB to do the upgrade.
Can I just backup the settings using the JAC-001 and Wintex software then flash the panel to the latest firmware, reset, then restore the backup or would it be advisable to upgrade in increments?
I'm only upgrading to allow me to install a smartcom unit. I don't have the knowledge to reprogram from scratch if it all goes wrong!
Any assistance kindly received.
Greenstick
Last edited: