Hi all
I will be fitting one of these this weekend http://www.plumbworld.co.uk/mx-neptune-thermostatic-bar-3224-18892 also ordered http://www.plumbworld.co.uk/bar-mixer-valve-fixing-kit-293-16361
The cold is mains fed and the hot is from a combi boiler, can I simply "T" joint off the hot and cold feed to the bath taps which is 15mm copper?
What would people recommend regarding compression/pushfit/soldered joints?
If using pushfit is it better to use copper, or plastic pipe with inserts??
Cheers
Andy
I will be fitting one of these this weekend http://www.plumbworld.co.uk/mx-neptune-thermostatic-bar-3224-18892 also ordered http://www.plumbworld.co.uk/bar-mixer-valve-fixing-kit-293-16361
The cold is mains fed and the hot is from a combi boiler, can I simply "T" joint off the hot and cold feed to the bath taps which is 15mm copper?
What would people recommend regarding compression/pushfit/soldered joints?
If using pushfit is it better to use copper, or plastic pipe with inserts??
Cheers
Andy