Fitting of zone valves

Joined
7 Nov 2003
Messages
25
Reaction score
0
Country
Czech Republic
Hi there,

I want to fit zone valves to my central heating system to separate the upstairs and downstairs of my house, each valve controlled by a seperate timer/thermostat.

In my 'boiler room' the plumbing is fairly simple, with the flow and return going upstairs teed off near the boiler. The system is a sealed system with and unvented how water tank.

Is it just a matter of fitting a zone valve to the flow of the downstairs radiators and one to the flow of the upstairs radiators, and wiring them in an 'OR' so that either or both will fire the boiler, or am I missing something?

Any advice would be greatly appreciated.
 
Sponsored Links
Thanks for the info..

From what it looks like the pluming and wiring is as I thought and I havent missed anything.

Thanks.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top