fitting radiator valve to plinth heater

[prmedloc]

Hi,

Does anyone know if tap connectors fittings can be reliably used to allow me to connect a trv inline to a plinth heater which only has 15m copper connections?

Or can someone tell me the correct fitting to do this! Can't find any trvs which don't have the male threaded fitting on the radiator side

Thanks for any replies and happy xmas.

...Phil

 

[cross thread]

most valves will take 15mm compression at either end ,you can also buy straight valves

 

[gas4you]

Most kickspaces have their own stat built in or you fit a remote one on the wall to control the booster fan.