I accidentally bought waste pipe for push-fit, rather than solvent weld. Sadly I've cut into one pipe before realising so I can't return the pack. This means that there are 9 x intact 3 metre lengths, plus one length cut into two.
I've tried selling it on ebay or giving it away on freecycle but no takers. Does anyone want to take it off my hands, I can't bear to just take it to the tip. It's free to anyone who can collect it from Camberwell. This coming weekend ideally, though I can be a bit flexbile on that.
The manufacturer's description below:
A 40mm push fit waste pipe in PVC-U. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
I've tried selling it on ebay or giving it away on freecycle but no takers. Does anyone want to take it off my hands, I can't bear to just take it to the tip. It's free to anyone who can collect it from Camberwell. This coming weekend ideally, though I can be a bit flexbile on that.
The manufacturer's description below:
A 40mm push fit waste pipe in PVC-U. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
