Flymo Lead

[securespark]

I have a Mountfield Princess with a lead that goes direct into the machine.

It has failed where the copper has broken inside the flex. You know the score, you waggle the flex in a certain position and the mower fires up.

This plus damage to the flex in several places means I have got a new lead.

It happens to be a Flymo lead.

I have the usual two part connector.

But before I hack off the Flymo connector, is there a male flying connector that I could connect to the mower to connect into the Flymo lead as it is?

I do know the Flymo lead is designed to attach direct to an inlet on the mower itself.

I can't find anything.

The guy in the mower repair shop I bought the lead from said he had something, but when he rummaged around for it, he couldn't find it, so it gives me hope that something exists (or did exist)...

 

[pete01]

Is this it? I done an image search and this came up on ebay?

 

[pete01]

No it's the wrong end isn't it?

 

[securespark]

Yes, I got one like that and sent it back today because it is the same as what is on the lead.

 

[pete01]

I cant find what you need you might have to chop it off and use the other type.

 

[securespark]

Thanks for looking, appreciate that.

 

[Robin0577]

I've never seen a rewireable version of the Flymo male connector, but there are adaptors both ways to/from Flymo to standard 2 pin..

https://www.ebay.co.uk/sch/i.html?_nkw=293508457512&_sacat=0&_from=R40&_trksid=m570.l1313