This is my first post having been lurking around for a while!
Anyway, for some reason a danfoss programmer just doesn't want to work. Was adding some radiators to a system so turned off the boiler e.t.c at the fused spur. Turned the fused spur back on when i'd finished the job, only to notice that the programmer hadn't come back on. The boiler and room stat is working fine. I've taken the unit off and there's power going to it. I followed the reset instructions in the manual but had no luck with that and it still wouldn't come back on. So it seems as though the programmer has gone duff. Not sure what else it could be? The unit is only 2 years old, surely turning the power off shouldn't damage the unit?
Anyway, for some reason a danfoss programmer just doesn't want to work. Was adding some radiators to a system so turned off the boiler e.t.c at the fused spur. Turned the fused spur back on when i'd finished the job, only to notice that the programmer hadn't come back on. The boiler and room stat is working fine. I've taken the unit off and there's power going to it. I followed the reset instructions in the manual but had no luck with that and it still wouldn't come back on. So it seems as though the programmer has gone duff. Not sure what else it could be? The unit is only 2 years old, surely turning the power off shouldn't damage the unit?