Galaxy 60 Alarm key fobs & max readers

[terry16]

I have a Galaxy 60 ver 2.10 installed but recently had a problem whilst moving a sensor. This blew a fuse in the unit and the system has reset and lost all programming.
I have managed to reset the tampers and reprogrammed the zones (it appears to work) but I am unable to work out how I can activate the key fobs again.
Can anyone tell me if I need to reprogramme the alarm to recognise the max readers and key fobs and how I do this? Any help would be much appreciated.

 

[mryoung]

Is it a max reader or keyprox keypad?

If max reader, PM your email and will send manual.

If keyprox -

enter your manager code

enter 42 ent - 1 ent

delete the existing code

hold down the A key and press 1

you will hear a double beep, hold your tag to the reader within 5 seconds of this beep

the tag number will show on the display followed by a single beep

press ent to save the tag number.

option 8 in menu 42 must be set to (timed set)

 

[terry16]

Thanks for the reply.
It is a MAX Proximity Access Reader.
I've sent you a PM.

 

[mryoung]

Sent

 

[terry16]

Reeived with thanks.