Garden room

Joined
30 Mar 2015
Messages
4,543
Reaction score
90
Country
United Kingdom
Can I get some advice with this please.
I am planning on building a timber garden room which will be 6.5m x 3 metres. It is going along my fence and I have left 0.5 metres behind the fence for maintenance and drainage. It's probably 10 metres away from the main house and at the bottom of the garden. I have a large garden and there's plenty of it left over after this. It's definitely not taking up 50% of my garden.

I think I can go 2.5 metres high measured externally and from the ground.

Can someone please advise. Thanks in advance.
 
Not a 100% sure but won't that be classed as a shed and therfore a temp. structure that you won't need planning permission for.
 
whaddya wanna know?

A pic or 2 would help.
Sorry for the rambling message.I was after validation of my understanding re. dimensions and build type and whether this is exempt from planning permission. Am I interpreting the rules correctly?
 
whaddya wanna know?

A pic or 2 would help.
He's asking about permitted development - as it's less than (IIRC) 2m from the boundary, then height limits apply. It's something I've looked into as I'm planning a (smaller) shed/workshop which will be right up to the boundary.
According to https://www.planningportal.co.uk/permission/common-projects/outbuildings/planning-permission it's :
• Outbuildings and garages to be single storey with maximum eaves height of 2.5 metres and maximum overall height of four metres with a dual pitched roof or three metres for any other roof.
• Maximum height of 2.5 metres in the case of a building, enclosure or container within two metres of a boundary of the curtilage of the dwellinghouse.
 
He's asking about permitted development - as it's less than (IIRC) 2m from the boundary, then height limits apply. It's something I've looked into as I'm planning a (smaller) shed/workshop which will be right up to the boundary.
According to https://www.planningportal.co.uk/permission/common-projects/outbuildings/planning-permission it's :
• Outbuildings and garages to be single storey with maximum eaves height of 2.5 metres and maximum overall height of four metres with a dual pitched roof or three metres for any other roof.
• Maximum height of 2.5 metres in the case of a building, enclosure or container within two metres of a boundary of the curtilage of the dwellinghouse.
I am within 2 metres of the boundary. The fence is 0.5 metres behind the proposed ball wall of this garden room. I think that's why the maximum 2.5 metre height applies.
On the dimensions of the garden room itself, as long as I am not using 50% of my garden, I am okay? I am planning to build 6.5m x 3m.
 
I think there was a note on the PP to say that you are not covered if in a Conservation Area, etc.

We don’t live in a conservation area and still needed PP for our shed.

Our neighbour told me this so I added it to our extension PP

Isn’t your height by the fence not going to be an issue?
 
Can I get some advice with this please.
I am planning on building a timber garden room which will be 6.5m x 3 metres. It is going along my fence and I have left 0.5 metres behind the fence for maintenance and drainage. It's probably 10 metres away from the main house and at the bottom of the garden. I have a large garden and there's plenty of it left over after this. It's definitely not taking up 50% of my garden.

I think I can go 2.5 metres high measured externally and from the ground.

Can someone please advise. Thanks in advance.
It would not need planning permission. The height is measured from the highest adjacent existing ground level.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top