Hello All,
First post but have found the advice here useful hundreds of times before - so Thank You all for keeping up such a great service.
We would like to build an office in the garden and I am wondering about insulation to go between the walls (ceiling and floor sorted mostly).
I was wondering if anyone has any experience of using Triso or similar foil insulation between the walls? The construction would be - 44mm Shiplap, breather membrane, 50mm stud, 30mm Triso (or equivalent), vapour barrier, and then 12.5mm plasterboard.
I am hoping this will achieve around 0.3 U-Value but everyone only seems to recommend Triso for roof applications.
The problem is that the base (already there) for the office is only 10' x 8' (3m x 2.5m) and I would like to keep the wall thickness to a minimum to maximise internal space.
Any help much appreciated.
Thank you.
First post but have found the advice here useful hundreds of times before - so Thank You all for keeping up such a great service.
We would like to build an office in the garden and I am wondering about insulation to go between the walls (ceiling and floor sorted mostly).
I was wondering if anyone has any experience of using Triso or similar foil insulation between the walls? The construction would be - 44mm Shiplap, breather membrane, 50mm stud, 30mm Triso (or equivalent), vapour barrier, and then 12.5mm plasterboard.
I am hoping this will achieve around 0.3 U-Value but everyone only seems to recommend Triso for roof applications.
The problem is that the base (already there) for the office is only 10' x 8' (3m x 2.5m) and I would like to keep the wall thickness to a minimum to maximise internal space.
Any help much appreciated.
Thank you.