Hi there, newbie here so please don`t bit
I`m about to have an extension built on my house enlarging the kitchen. I`m going fit an island with 6 burner gas hob fitted in it and wanted to know the best way of running the feed pipe. From the existing concrete slab up I`m fitting 35mm profiled UFH with travertine tiles ontop of that. Should I simply use a 22mm copper pipe slotted into the 35mm insulated ufh boards or use a pvc coated 22mm pipe cut into a groove in the slab with the ufh boards ontop. The island is only 3m from the external wall and the gas meter is then only 2m away My Gas safe man will be making the final connections.
I`m about to have an extension built on my house enlarging the kitchen. I`m going fit an island with 6 burner gas hob fitted in it and wanted to know the best way of running the feed pipe. From the existing concrete slab up I`m fitting 35mm profiled UFH with travertine tiles ontop of that. Should I simply use a 22mm copper pipe slotted into the 35mm insulated ufh boards or use a pvc coated 22mm pipe cut into a groove in the slab with the ufh boards ontop. The island is only 3m from the external wall and the gas meter is then only 2m away My Gas safe man will be making the final connections.