- Joined
- 24 Nov 2004
- Messages
- 430
- Reaction score
- 5
- Country
I'm trying to work out the wiring for a gas central heating system in a flat...
there is a Suprima 40 boiler, circulating pump, two zone valves (one for DHW, one for radiators) and a thermostat which is lashed onto the side of the vessel (with a small hole cut into the insulating so the thermostat couples sraight on to the copper)
there is a potterton ep2002 which appears to have been used as a wiring center.
I cannot find a room stat anywhere.
I'm a bit short of time and would really appreciate any help on what might be "going on" here, and any recomendations as to how it could be improved. (putting in a room stat seems like a good idea but where should it go and is there already one wired in)
I was hoping that the wiring arrangement may be "recognized" by one with more experience than I...
there is a Suprima 40 boiler, circulating pump, two zone valves (one for DHW, one for radiators) and a thermostat which is lashed onto the side of the vessel (with a small hole cut into the insulating so the thermostat couples sraight on to the copper)
there is a potterton ep2002 which appears to have been used as a wiring center.
I cannot find a room stat anywhere.
I'm a bit short of time and would really appreciate any help on what might be "going on" here, and any recomendations as to how it could be improved. (putting in a room stat seems like a good idea but where should it go and is there already one wired in)
I was hoping that the wiring arrangement may be "recognized" by one with more experience than I...