Gloworm Swiftflow 80 manual required.

[Jezzy]

I don't suppose anyone has one that they could email to me please?
I must have over 500 manuals in pdf format that i bought off of ebay but this one isn't on either of the 2 cds and its one i need.
____________________________
lynda, moderator

Good luck, but remember forum rule 7

 

[pannierstan]

I have one but at the moment no way of getting on to computer.

Can I help in any way. Like whats the problem

 

[ChrisR]

Swiftflow 100, or 80e, are my closest.

 

[Jezzy]

its the 80e but i'll take both if you can email em to me?
Thanks
its a fan problem - check earlier posts, if i have any you need, don't hesitated to ask.

 

[ChrisR]

Nobody knows your email address unless you put it in your Profile.

 

[Jezzy]

it is in my profile? you can't join the list unless you put it in there. . . can you?

 

[timmy74]

I don't suppose anyone has one that they could email to me please?
I must have over 500 manuals in pdf format that i bought off of ebay but this one isn't on either of the 2 cds and its one i need.
____________________________
lynda, moderator

Good luck, but remember forum rule 7

any way i can get a copy of those 2 cds

 

[Jezzy]

http://cgi.ebay.co.uk/500-BOILER-MA...6QQihZ008QQcategoryZ42234QQrdZ1QQcmdZViewItem

copy above link into google

Auction ends in 35 mins. £2.99 for 2 cds plus postage which is about £2. Over 500 manuals!
Or i can copy em for you if you send me your email address and pay the postage and cds (about £1).

This is not my auction by the way!

 

[geoff@cetltd]

Why not just email him the pdf of the manual he requires ?

 

[ChrisR]

Why not just email him the pdf of the manual he requires ?

BECAUSE WE DON'T HAVE HIS EMAIL ADDRESS!!!
Click on most people's names, at forum level where all the threads show, and you see most don't put email addresses in their Profile. You have to give an email address to ask a question, but putting it in your Profile is a separate thing.

 

[geoff@cetltd]

I can see that as being an obstacle ...

but as GOSKs I would have tthought you could have divined it by putting some fernox in a teacup or something

 

[ChrisR]

I can see that as being an obstacle ...

Oh good, managing to work a few things out.
Definitely a step on from resoldering joints on circuit boards

 

[Jezzy]

Sorry, my mistake, it isn't there is it?
I'll put it there today if i can figure out how to do it.

 

[Jezzy]

It is now though!

 

[Jezzy]

Any chance of sending me that manual now i've put my email address there? Like i said, any you want, if i've got em, you can have em.