Hey I have a reducer to go in to a 20mm mdpe tee to reduce to 15mm copper. Does any on know which way the coned grab ring should face? So is its like an arrow on the pipe going towards the fitting or the other way so its like an arrow pointing towards the pipe. Hope that makes sense.
grab ring mdpe to 15 copper
- Thread starter tomsim
- Start date
check the "nut" part- you should see it's tapered. the insert corresponds and as you tighten up it grips the pipe.
What make?
Here's the fitting instructions for the Philmac adaptor:
http://www.philmac.co.uk/technical-...ctions/metric-imperial/copper-conversion-kit/
Here is how the Plasson one should be assembled:
View media item 44574
Here's the fitting instructions for the Philmac adaptor:
http://www.philmac.co.uk/technical-...ctions/metric-imperial/copper-conversion-kit/
Here is how the Plasson one should be assembled:
View media item 44574
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local