Gutter angle

[markf]

Hi, I need to install some guttering around my new extension. The problem is one of the corners is 160 degrees. I have only seen guttering corners 90 or 135 degrees.

Guttering is to be roundline 112mm in white.

Is it possible to get 160 degree gutter corners, or have it made specially? If so where is the best place to get it from in the Reading area (or if you know of an Internet based, or mail order based supplier)?

Thanks

 

[masona]

Not sure if this will help you ?

The other way if possible is to use a gutter stop end outlet and start another gutter underneath it.

 

[Oskool]

Try Asphaltic at Slough, Tel:01753 570526.
They can get a Hunter half round 112mm white gutter made to order in any angle.
The cost would be about 20.00 each and takes 10-15 days to make.
Collect or for 10.00 they will deliver.

 

[markf]

Thanks for the replies. i will look into them.

 

[JerryD]

Also try Roofline Plastics in High Wycombe (01494 533445) They offer a 'custom made' service where they make unusual gutter pieces. They do it in the shop using a special welding tool for the plastic fittings.

Very neat and not too expensive. They can also create custom downpipe fitments too.