Hi,
I have the same problem.......did you manage to solve this please ?
MOD 2
please don't hijack old posts
I have the same problem.......did you manage to solve this please ?
MOD 2
please don't hijack old posts
halstead prob
- Thread starter wanleg
- Start date
I think that the plate to plate heat exchanger has become blocked on the central heating side and this is stooping the water circulationg around the boiler and causing it to boil
had this problem several times on this boiler, pop and new one in and bobs your mums bro
had this problem several times on this boiler, pop and new one in and bobs your mums bro
Cheers Corgiman but tried that already.........had problems with dirt in the DHW HE in the past but this has caused the burner to go on and off, I guess due to lack of flow....what's the chances that the primary could require cleaning ?
system was cleaned and inhibitted with Fernox CH Restorer and CH protector in Nov. 2005. The primary has never been removed and cleaned since the boiler was new some 3 or so years ago......looks straight forward enough to take out....are there any obvious gotchas to watch out for ?
no not really they are quite easy to change, two screws at the bottom if memory serves
dont forget to change the thermisters while its drained down, i do this as a matter of course with halsteads now.
actually i try to change halsteads to another boiler as a matter of course if the customer will let me
dont forget to change the thermisters while its drained down, i do this as a matter of course with halsteads now.
actually i try to change halsteads to another boiler as a matter of course if the customer will let me
Two screws at the bottom....is that the DHW HE you are talking about ? if so it's the primary I want to remove. I have to say that these boilers usually get a bad write up but i've found this one not too bad...I live in a hard water area so it pretty much doesn't matter what you have it's open to attack.
oh sorry mate, no the primary should be fine as you have no probs in ch heating mode
I meant that the DHW exhanger, the primary side can block up and then the water does not circulate around it to the primary and back again
sorry for not being clear
I meant that the DHW exhanger, the primary side can block up and then the water does not circulate around it to the primary and back again
sorry for not being clear
hard water gerraway 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
