Heatslave 12/14 no heat, in fact nothing at all.
- Thread starter vick1
- Start date
Sponsored Links
I have a heatslave 15/19 that exhibits a similar problem. In my case I can get hot water and /or heating by knocking the timer front panel. On doing this the relays inside operate and the boiler fires up. I haven't checked it out yet (much to my wifes annoyance) but my suspicion is a dry joint on the timer pcb. Hope so as a replacment is around £120.
With regards to the diverter valve mentioned earlier. Anyone thinking of changing this needs to get the part number from Worcester as I changed one once with a standard valve from Honeywell and it didn't work. Apparently the Worcester one has some of the connections reversed?
Best of luck
Paul
PS if anyone has found a bad joint on the timer module I'd appreciate knowing where abouts it was.
With regards to the diverter valve mentioned earlier. Anyone thinking of changing this needs to get the part number from Worcester as I changed one once with a standard valve from Honeywell and it didn't work. Apparently the Worcester one has some of the connections reversed?
Best of luck
Paul
PS if anyone has found a bad joint on the timer module I'd appreciate knowing where abouts it was.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
