I've just tiled the downstairs toilet and removed the toilet before I did. Obviously the toilet now sits about 10mm higher than before and because of that the inlet and overflow wont quite fit back on. The waste was ok by the way.
I've pasted pictures in below of how things look now
I'm guessing for the overflow it's easier just to cut some new pipe rather than mess around trying to extend it. My problem is what to do with the inlet pipe.
I've been given some flexi hose type connector but its around 10 inches long and I'm thinking that might be abit overkill just to bridge a 10mm gap ?
Lastly I think i need to seal the basin to the tiles with some kind of sealant ? Would a bead of ordinary bathroom sealant be ok for this ?
Thanks for any help
Bulla
I've pasted pictures in below of how things look now
I'm guessing for the overflow it's easier just to cut some new pipe rather than mess around trying to extend it. My problem is what to do with the inlet pipe.
I've been given some flexi hose type connector but its around 10 inches long and I'm thinking that might be abit overkill just to bridge a 10mm gap ?
Lastly I think i need to seal the basin to the tiles with some kind of sealant ? Would a bead of ordinary bathroom sealant be ok for this ?
Thanks for any help
Bulla