help identifying boiler part

[ross1995]

hi all i need some help identifying a part on my boiler it looks like the thermo couple it goes in near it and when I remove it and press the ignition gas comes out any ideas the other end goes in to where the ignition spark is its about 12" long thin tube thanks

 

[gas4you]

Sounds like a pilot gas tube.

Make and model of boiler would have helped

 

[ross1995]

sorry
baxi solo wm 50/40 rs
41-077-49

 

[gas_man_gaz]

just out of curiosity.. why?

 

[ross1995]

when i took it out the end fell under floor boards so i need to get a new one my local plumb center did not have one so i am trying get one online thanks

 

[clf-gas]

when i took it out the end fell under floor boards so i need to get a new one my local plumb center did not have one so i am trying get one online thanks

What the pilot injector fell out

 

[ross1995]

if thats what its called pilot injector yea the end fell of about 10mm long and goes into the boiler

 

[clf-gas]

If you took off the pilot gas feed from the pilot assembly then I think you have lost the injector.

Was the pilot not igniting.

Sounds as though you have gas to pilot and the lost injector was blocked.

 

[clf-gas]

Thinking about it, it may not be the injector rather the injector seating, the bit that sits on the end of the pipe above olive and knut,

 

[ross1995]

no pilot not lighting but i will need to get anther one is this the right one
Baxi 225492 Pilot Injector thanks

 

[clf-gas]

Not sure to be honest, new laptop and have,nt set up my browsers yet

You can find the correct part and picci`s here http://www.interpartspares.co.uk/

 

[ross1995]

thanks for that link i have at this all day tring to find that part superb

 

[clf-gas]

thanks for that link i have at this all day tring to find that part superb

No problems Ross, and at 12years old should you be fixing mummy`n`daddies boiler