Hi all,
1st post for me on here & nice Forum by the way!
Problem I have is an old (1939 built house) bedroom wall/s that have pin holes in them in patches, It used to have wall paper but we have pulled it off & sanded the walls smooth (filling as we went). The holes can be described as wood worm like (only a mm or so) & a couple of coats of Emulsion (1st coat watered down a little) & one coat of one coat paint (applied by a roller) & they are still there.
I'm thinking of trying Polycell base coat as it looks like it may hide/fill such defects. There is too many to fill by normal means as it would be like starting again.
Any other suggestions gratefully received
Cheers,
Co.
1st post for me on here & nice Forum by the way!
Problem I have is an old (1939 built house) bedroom wall/s that have pin holes in them in patches, It used to have wall paper but we have pulled it off & sanded the walls smooth (filling as we went). The holes can be described as wood worm like (only a mm or so) & a couple of coats of Emulsion (1st coat watered down a little) & one coat of one coat paint (applied by a roller) & they are still there.
I'm thinking of trying Polycell base coat as it looks like it may hide/fill such defects. There is too many to fill by normal means as it would be like starting again.
Any other suggestions gratefully received
Cheers,
Co.