Hi all,
Was really hoping for some help on an issue I'm having.
Have been doing a mini project replacing 9 10w 12v G4 bulbs with softer 12v 3w LEDs. I was doing them one at a time to make sure there were no issues and I could test each individual light.
I got through 7 without any issues whatsoever. The LEDs would fire up without any problem.
But with light 8, when I switched on the light, all the lights flicked on, then went off and stayed off. When they're off, if I check for live current on each of the lights I'm getting an alert - so there is power flowing, but the lights aren't switching on.
To try to troubleshoot I removed each of the lights one by one until I basically had 1 left - the first I had installed. Same issue.
I'm now left with the entire set of 9 not working...
Any tips / suggestions / troubleshooting recommendations?
Thanks!
Was really hoping for some help on an issue I'm having.
Have been doing a mini project replacing 9 10w 12v G4 bulbs with softer 12v 3w LEDs. I was doing them one at a time to make sure there were no issues and I could test each individual light.
I got through 7 without any issues whatsoever. The LEDs would fire up without any problem.
But with light 8, when I switched on the light, all the lights flicked on, then went off and stayed off. When they're off, if I check for live current on each of the lights I'm getting an alert - so there is power flowing, but the lights aren't switching on.
To try to troubleshoot I removed each of the lights one by one until I basically had 1 left - the first I had installed. Same issue.
I'm now left with the entire set of 9 not working...
Any tips / suggestions / troubleshooting recommendations?
Thanks!