HELP REQ Bosch Oven ENR - HBN560550b/02 FD- 8512

[h4kan]

guys/girls

i need your help bigtime

I bought an oven "BOSCH - ENR - HBN560550b/02 FD- 8512" from MFI Clearance about a year ago without a door handel. i purcaced the handel from "https://www.bosch-eshop.com" i have just installed the oven and it switches on fine. BUT it woudnt heat up so after some investigation i found out that the door has a switch. when i place a magnet near the switch the oven heats up so im guessing that a magnet goes into the door.

Any ideas im desperate

ANY THING PART NUMBERS WORK AROUND ANYTHING PLEASE

 

[jj4091]

Not 100% sure but I would have thought that the magnet should be fixed to the frame of the oven in line with the switch on the door so that when the door is open the heat swiches off. Or if when you say" the door has a switch" you mean the oposite way round to as I am saying, then vice versa. Can you fit a small magnet from a magnetic latch?

 

[h4kan]

there is already a switch on the oven the part that i am looking for is to be fitted on the door so when the oven door is shut the onbord computer knows its safe to heat the oven up.

for the moment some magnets from maplins is doing the job. but would be nice to get the proper part

 

[jj4091]

Have you tried here http://www.espares.co.uk/search/cookers-and-hobs/bosch/p/1092/856