Help required in resetting Eurosec

[BeeKayVee]

Hello To all,

Recently I bought a house . The alarm type is Eurosec ( I believe it is CP8L) The previous owner mentioned that they never used this alarm and they forgot the code. The display shows "Mains Flt" I don't know what this means, Is there anyway to make this alarm working. Please help me.

 

[Handymanjo]

If you do not no the code the only thing you can do is default the panel back to factory restore.
If control panel engineer locked then control panel useless. You will only no this when defaulting as will not allow you to change default engineer code or change zone programming.
Mains flt means the electric has been turned off/ power cut

 

[BeeKayVee]

Hi Thanks a lot for your response, when you say Electric has been turned off, I don't see anything switched off or no power control I see for this unit. all the wirings are hidden behind the panel. When open the cover, the control panel is lighting up

 

[sparkymarka]

You may be better getting someone out to look at it !

 

[Handymanjo]

The system monitor's the mains electricity, so if power has been turned off or you have had a power cut the control panel will inform you.

 

[BeeKayVee]

Thank you so much sparkymarka , I'll look for someone to check

&

Thanks Handymanjo for your response.