HELP - Trimming the bottom Internal door ? Not removing ??

[bilabonic]

Hi

As thread, will a multi tool do it ?

Thanks

 

[Burnerman]

Personally I'd remove the door and reach for the plane.....always the best in the long run, I find.
John

 

[AlanE]

Multi tool would do the job but getting an acceptable cut might be difficult.

I normally remove door and use a standard circular saw but if you really don't want to remove the door you can buy/hire a dedicated circular saw for trimming door bottoms.

 

[bilabonic]

I really want to avoid that if possible the hinges/screws are not even visible due to thirty layers of gloss...lol

 

[bilabonic]

I have never seen a dedicated tool for that purpose, it's virtually needs 2mm, as it's just scraping the floor as it closes..

 

[bilabonic]

Undercut saw...Sorted.

Cheers guys.

 

[joe-90]

Have you tried putting sandpaper on the floor and opening and closing the door onto it a load of times?

 

[AlanE]

I have never seen a dedicated tool for that purpose, it's virtually needs 2mm, as it's just scraping the floor as it closes..

Google 'bottom of door trimmer' there are loads of examples.