I have been tasked with moving a rad for someone. Their boiler is a Danesmoor Utility oil-fired model (looks quite old). I have only ever done such a task on a combi. Does draining down just mean
1. Switch off boiler; tie up the feed tank ballcock, or switch off the water, whichever is easier
2. Finding a convenient drain point and draining
3. Doing the plumbing changes
4. Refill and bleed etc
5. Fire up the boiler
6. Bleed as necessary.
What about inhibitor - X100 required?
Thanks a lot
1. Switch off boiler; tie up the feed tank ballcock, or switch off the water, whichever is easier
2. Finding a convenient drain point and draining
3. Doing the plumbing changes
4. Refill and bleed etc
5. Fire up the boiler
6. Bleed as necessary.
What about inhibitor - X100 required?
Thanks a lot