Help with hive heating

[Bobcat1979]

Hiya.
New to the forum and I need I bit of help. I’ve bought a hive heating kit to install on an ideal logic combi boiler. There is a Honeywell wireless receiver next to the boiler that will be replaced by the hive. When I looked at the wiring the boiler is supplied from a wall socket via the receiver. The reviver has a terminal for power in and a terminal for power out but the hive only has one terminal for the live from the boiler. Any idead how I’d wire this up? Pic below.

Thank you

 

[Johnmdc]

It is the single channel Hive that you have got? If it is then:-
Both blues to N
Both Browns to L
Both earths to earth
Grey to 1
Black to 3