Hello, I'm new to this site and would like some help if you kind folks don't mind
I've got a Baxi combi 105e and i'm having problems with the pressure
( sometime reaching 4bar !!)
Since re-fitting a radiator before Xmas, the pressure has been shooting up whenever the hot water has been used ( it may have been happening with heating too , but not sure ) reaching 4 bar. I have been lowering the pressure via a bleed valve on the nearest radiator virtually every day for the last month or two. But I've noticed the pressure appears to be rising thru the night when heating/Hwater are not being used . The filling loop is still attached , could it be a dodgy filling loop ( staying open ? ) as this was used after re-fitting radiator .
Sorry for the long post, and answers appreciated
I've got a Baxi combi 105e and i'm having problems with the pressure
( sometime reaching 4bar !!)
Since re-fitting a radiator before Xmas, the pressure has been shooting up whenever the hot water has been used ( it may have been happening with heating too , but not sure ) reaching 4 bar. I have been lowering the pressure via a bleed valve on the nearest radiator virtually every day for the last month or two. But I've noticed the pressure appears to be rising thru the night when heating/Hwater are not being used . The filling loop is still attached , could it be a dodgy filling loop ( staying open ? ) as this was used after re-fitting radiator .
Sorry for the long post, and answers appreciated