High temperature glue - glass to metal

[Nozzle]

Does anyone know of a half decent high temperature, non-flamable (once set), glue that it suitable for sticking glass to metal?

The wife has bought a gadget for her work that is in generally good condition but internally there is a small glass plate that was affixed to a frame that holds a high powered light bulb. As you imagine, it all gets pretty hot in there..

Nozzle

 

[Diyisfun]

I think 2 part araldite will take temperature, it will certainly stick metal/glass.
Silicone will also, the stuff used to stick ceramic hobs to the frame, you may have problem sourcing it though.

 

[Burnerman]

+1 for the Araldite epoxy......either standard or rapid set will do fine.
John

 

[foxhole]

Double sided tape as supplied for oven doors, takes temp above 250c.

 

[Nozzle]

Thanks for the feedback and ideas - she ordered some oven door glass glue which I expect should do the job perfectly. Epoxy resin still available in a drawer somewhere if it needs that little bit more support.

Nozzle