- Joined
- 21 Nov 2017
- Messages
- 2
- Reaction score
- 0
- Country
Hi folks- first time poster after some advice before I buy the HIVE heating and hot water.
Currently have a Siemens RWB9 control panel and from initial research it looks like I could just slot the HIVE receiver straight into the existing back plate. Would you agree?
Ive included some pictures of the current setup including my thermostat which has never worked (is this because the blue wire is not connected?)
I've also read threads where advice is to connect red and yellow wires to bypass the thermostat once hive is in place (as I cant trace it back to a wiring box) - is this necessary?
many thanks
Currently have a Siemens RWB9 control panel and from initial research it looks like I could just slot the HIVE receiver straight into the existing back plate. Would you agree?
Ive included some pictures of the current setup including my thermostat which has never worked (is this because the blue wire is not connected?)
I've also read threads where advice is to connect red and yellow wires to bypass the thermostat once hive is in place (as I cant trace it back to a wiring box) - is this necessary?
many thanks