Hive wiring help please

[Ashley storer]

Hi guys,

New here so please be gentle

I have already searched but can't find my answer.

I have a Worcester 240 and a hive system that I removed from an old house.

I have attached images of what I am working with.

Thanks

 

[Gas2Air]

Where are 1 and 3 going from the HIVE backplate? Be careful with this boiler because if you fry one or both of them boards they are obsolete.

 

[Ashley storer]

That's what I am try to figure out

 

[Gas2Air]

That's what I am try to figure out

Can you post a pic of the X4 connection?

 

[Gas2Air]

L and N to mains, Link L on backplate to 1. Use the black to grey on X4.

 

[Ashley storer]

Here is x4 on the board

 

[Gas2Air]

Here is x4 on the board

Take link out 1 and 2. Live and Neutral to mains, link L and 1 in backplate and black to 2 on X4, make sure your clock is turned to ON.

 

[Ashley storer]

So nothing goes into x10, that stays as it is.

And the only thing that goes to x4 is the black from 3 in the back plate?

Thanks

 

[Gas2Air]

So nothing goes into x10, that stays as it is.

And the only thing that goes to x4 is the black from 3 in the back plate?

Thanks

yep, you can use 1 with your grey from backplate, just easier to use link L to 1 on HIVE backplate.

 

[Ashley storer]

Ok. Will give it a whirl. Thanks

 

[Gas2Air]

Ok. Will give it a whirl. Thanks

And don't forget, SAFE ISOLATION!

 

[Ashley storer]

Already know where the switch is

 

[Ashley storer]

Just put of interest what do I do with the grey end in the boiler?

 

[Gas2Air]

You don't need it if you link Live and 1 on HIVE backplate.