Honeywell T3R to Hive (multizone)

[JoeB1]

Hi,

I’m about to switch our Honeywell T3R over to Hive multizone set up. There are 2 Honeywell receivers from a main control box. Can anyone help with correct wiring for the hive backplate?

Currently on each receiver there is a link wire from L to A, this is the bit I’m getting stuck on!

I’m thinking:
N to N
L to L
L to 1 (link)
B to 3

Is this right?

Any advice appreciated!

Thanks

 

[stem]

I’m thinking:
N to N
L to L
L to 1 (link)
B to 3

Looking at your photo. it's not clear, but if as you say, there is a link in place between Honeywell L and A, then yes that's correct.

 

[RandomGrinch]

Looking at your photo. it's not clear,

Definitely a link - the benefits of zooming on a phone screen

 

[JoeB1]

sorry for the poor photo but thanks for the advice.. have wired up as suggested on both recievers and all working well.

cheers!