Hotpoint Aquarius WDL540P.UK.C - Error Lights (Which Error Code ?)

[happyman]

We had a problem with our Hotpoint Aquarius WDL540P.UK.C and it turned out to be a faulty motor. - It wasn't turning.

This has now been replaced and for the first time in a while the machine has started going through the cycles.

However, after a while we looked at the machine and now we have many lights flashing. I believe this refers to a particular error code.

Does anyone know which error code these warning lights are referring to ?

Thanks in advance

 

[happyman]

Also here is the video showing the flashing lights.

https://streamable.com/ttot5h

 

[jj4091]

Not 100% sure but suspect it is F15 drier relay fault. Could be main pcb needs replacing which is not usually an economical repair. If you don't get a definite answer on here give Hotpoint a ring & ask them.

 

[happyman]

Not 100% sure but suspect it is F15 drier relay fault. Could be main pcb needs replacing which is not usually an economical repair. If you don't get a definite answer on here give Hotpoint a ring & ask them.

Thank you for the reply.

Is there an easy way to check the error lights for the error code to be more sure ? - Otherwise I will try and contact Hotpoint on Monday.

Thanks again